【 Maintenance Tips 】 Please Check The Maintenance Tips For The Kaili Fenghuoyue Prodigy Series Sanit

The Living Yue Prodigy Series

Maintenance Tips For Pure Electric Sanitation Vehicles (Universal Across All Models)

The Kaili Fenghuoyue Shentong Series Pure Electric Micro Series Sanitation Vehicles Cover Five Types Of Vehicles: Self Loading And Unloading Garbage Trucks, Sealed Bucket Garbage Trucks, Road Sweepers, Washing And Sweeping Vehicles, And Road Maintenance Vehicles. They Have Many Advantages Such As Compact Body, Flexible Maneuverability, Zero Emissions, Low Noise, Low Cost, And Labor Liberation. It Can Be Registered With A Green License Plate, Is Legal And Compliant, And Is Used To Replace Unlicensed And Illegal Three Wheeled Electric Sanitation Vehicles. Once It Is Introduced To The Market, It Has Gained Widespread Market Support.

As The Saying Goes, "70% Depends On Quality And 30% Depends On Maintenance". Good Vehicle Management And Maintenance Are The Key To Reducing Vehicle Failure Rates. Only Regular Maintenance Of The Vehicle (upper And Lower Chassis) Can Ensure That It Is Always In Good Operating Condition. In Order To Improve Vehicle Efficiency And Attendance, And Generate Maximum Economic Benefits, Please Strictly Follow The Following Methods For Maintenance And Upkeep.

Requirements And Maintenance For The Use Of Pure Electric Chassis

Usage Requirements: Pure Electric Vehicles Should Perform Automatic Full Charging Operation At Least Once Every Three Days. When Performing Full Charging Operation, Select The "automatic Charging Mode" Of The Charger Until The Charger Displays "charging Completed" Before Pulling Out The Gun.

Attention: Failure To Fully Charge According To The Above Requirements May Result In A Decrease In SOC Progress, Inaccurate Estimation Of Range, Which May Cause The Vehicle To Break Down. At The Same Time, The Consistency Of The Power Battery May Also Deteriorate, Resulting In A Reduction In Available Capacity And A Decrease In Range; When The Instrument Shows' Low Battery ', Please Charge It In Time.

Maintenance And Upkeep Of The Upper Part

Daily Maintenance And Upkeep:

The Power Unit Needs To Replace The Hydraulic Oil Every 6 Months To Avoid Electromagnetic Valve Jamming Caused By Impurities In The Hydraulic Oil.

Regularly Check The Fixing Of The Box Sub Beam And Chassis Connection Plate, And Tighten All Nuts To Ensure Reliable Connection.

Add Lubricating Grease To Each Hinge Point Oil Nozzle.

Clean Up The Garbage And Debris Stuck On The Hydraulic Cylinder Of The Hoist To Avoid Damaging The Dust Ring Or Oil Seal Of The Cylinder; Apply Lubricating Grease To The Surfaces Of The Elevator Slide And The Push Plate Slide (this Only Applies To Self Loading And Unloading Garbage Trucks).

● Clean The Sealing Joint Surface Of The Tailgate To Ensure Good Sealing, While Avoiding Sharp Or Hard Objects In The Garbage From Damaging The Rubber Sealing Strip (only Applicable To The Land Cruiser).

First Level Maintenance:

The First Level Maintenance Focuses On Lubrication And Fastening. In Addition To Performing Daily Maintenance Tasks, The Following Items Need To Be Added.

● Cleaning Task - Thoroughly Rinse All Parts Of The Vehicle (avoiding Electrical Components And Chassis Batteries) And The Inside And Outside Of The Garbage Bin.

Lubrication Operation - Add Lubricating Grease To The Grease Fittings At The Hinge Points Of Each Oil Cylinder, Track, Slide Rail, Etc.

● Check The Fastening Operation - Check Whether The Fixing Screws Of The Chassis And The Upper Connecting Plates Are Loose, And Tighten The Fastening Connections Of The Oil Cylinder Pin Shafts If Necessary.

Follow The First Level Maintenance Content Specified In The Chassis User Manual.

Secondary Maintenance:

Secondary Maintenance Focuses On Inspection And Adjustment.

Perform All Items Of First Level Maintenance.

Follow The Second Level Maintenance Content Specified In The Chassis User Manual.

Fault Analysis And Troubleshooting