Regarding The Running In, Daily Inspection, And Maintenance Of New Cars!

There Are Too Many New Car Buyers!

The Kaili Zhuan Car Room Is Fully Booked!

Brothers And Sisters Of The Marketing Department Work Overtime To Receive Orders And Issue Contracts

Kaige Has Also Received Feedback From Some Car Enthusiasts

Regarding The New Car Running In And Daily Maintenance Process Of The Sprinkler Truck

I'm Not Particularly Familiar With It

Well, The Understanding Kaige Immediately Arranged It

Our Kailifeng Brand Sprinkler Truck Maintenance Guide

Car Enthusiasts, Pay Attention And Check!

New Car Running In

New Cars Have A Period Of Running In, And In Order To Achieve The Expected Performance Indicators And Extend The Service Life Of The Sprinkler Truck, It Is Necessary To Conduct Running In During The Initial Use Of The New Sprinkler Truck.

The Corresponding Driver Should Carefully Check The Relevant Instructions Attached To The Car, Pay Attention To The Kaili Special Auto Official Account To Watch The Operation Video Of The Sprinkler, And Master The Basic Operation Methods And Maintenance Regulations Of The Sprinkler.

Upper Fitting And Running In

The New Car Running In Time For The Sprinkler Truck Operation Device (installed) Is 50 Hours. After The Running In Period, The Driver Should Complete The Following Maintenance Work:

Check For Any Oil Or Water Leakage In The Entire Machine, And Ensure That All Electrical Switches, Solenoid Valves, And Instruments Are Functioning Properly.

Check The Tightness Of Tire Nuts And Fastening Bolts, And Inspect The Appearance And Air Pressure Of The Tires.

● Clean The Filter Element Of The Water Filter.

Eliminate Faults That Occur During The Running In Process.

Routine Inspection

Daily Inspection Of Chassis

The Chassis Involves Many Spare Parts, And The Corresponding Daily Inspection Work Is Complex. Generally, A Separate "Chassis User Manual" Is Included With The Vehicle, And The Driver Can Check According To The Manual.

Daily Inspection Of Homework Equipment (installation)

Daily Inspection Of Sprinkler Truck Operation Device (upper Installation):

Check If All Fastening Bolts Are Loose, And If The Saddle Bolts Of The Water Tank Are Loose.

Check If The Seals At Each Connection Of The Waterway Are Damaged, And If The Water Tank, Waterway, And Valves Are Leaking.

Observe Whether There Are Any Abnormal Vibrations Or Sounds During The Operation Of The Power Take-off, Transmission Shaft, And Water Pump.

Check Whether The Valve Actions Of Each Working Device Are Flexible And Whether The Nozzle Clearance From The Ground Is Appropriate.

Routine Maintenance

Routine Maintenance Of Homework Equipment (installation)

Routine Maintenance Is Carried Out After Daily Work, And It Is The Foundation Of Maintenance At All Levels, With A Focus On Cleaning And Inspection.

Wash The Exterior Of The Vehicle Body And Various Assemblies, Wipe The Glass And Rearview Mirrors, Etc.

Check The Entire Vehicle For Any Oil, Water, Or Air Leaks.

Check And Clear All Nozzles.

Check If The Bolt Connections Of The Power Take-off, Transmission Shaft, And Water Pump Are Loose, And Tighten Them If Necessary.

Check If The Saddle Bolt Connection Of The Water Tank Is Loose, And Tighten It If Necessary.

Check Whether The Connections Of The Homework Platform Are Loose, And Tighten Them If Necessary.

Eliminate The Faults That Occurred On That Day.

PS: Chassis Maintenance Is Generally Carried Out According To The "Chassis Maintenance Manual" Provided By The Chassis Supplier With The Vehicle, Which Is Omitted Here By Kaige.

Graded Maintenance Of Homework Equipment (upper Installation)

First-level Maintenance

First Level Maintenance Is Conducted Once A Week, With A Focus On Lubrication And Fastening. In Addition To Routine Maintenance Tasks, The Following Additional Items Need To Be Added:

Thoroughly Flush All Parts Of The Vehicle, Drain Water From The Water Tank And Filter The Water Inlet To Remove Any Sediment From The Tank. Check And Clear All Nozzles.

Check The Oil Level Of The Water Pump And Add Lubricating Oil Of The Specified Grade If Necessary.

Check The Connections Of The Power Take-off, Water Pump, Transmission Shaft, Water Tank, And Rear Work Platform, And Tighten Them If Necessary.

Check And Adjust The Position And Angle Of The Nozzle.

Secondary Maintenance

Secondary Maintenance Is Carried Out Every 250 Hours Of Operation, With A Focus On Inspection And Adjustment

Perform All Items Of First Level Maintenance.

The Lubricating Oil Of The Water Pump Must Be Replaced Every Six Months Of Operation, And The Technical Condition Of The Water Pump Must Be Checked According To The Instructions In The Water Pump Manual.

Check The Power Take-off, Water Pump Drive Shaft, Warning Light, Reflector Light, Etc., And Repair And Replace Them If Necessary.

Check The Sealing Of The Clamps And Joints That Secure The Waterway.

Three-level Maintenance

The Third Level Maintenance Is Carried Out After Every 1000 Hours Of Operation, With A Focus On Disassembling, Cleaning, Inspecting, Adjusting, And Eliminating Hidden Dangers Of Some Assemblies, And Executing All The Contents Of The First Level Maintenance And The Second Level Maintenance.

Maintenance Operation

Oil (grease) Filling For Homework Equipment (upper Installation)

Oil (grease) Filling Requirements:

Fill The Water Pump Gear Chamber With GB5903-86 N220 Medium Load Industrial Gear Oil, With The Filling Amount At The Midpoint Of The Dipstick Marking.

Add Calcium Based Grease To The Transmission Shaft Oil Nozzle, With An Appropriate Amount Added.

PS: Filling Of Chassis Grease: The Filling Of Chassis Grease Should Be Carried Out According To The Provisions Of The "Chassis User Manual".

Adjustment Of Sprinkler Truck

The Maintenance And Adjustment Data Of The Chassis Shall Be Operated According To The Provisions Of The "Chassis User Manual".

The Maintenance And Adjustment Data For The Homework Device (upper Installation) Are:

1. The Adjustment Value For The Height Of The Front Punch Off The Ground (full Tank) Should Be ≥ 230mm

2. Optional Duckbill Height Above Ground (full Tank) Adjustment Value ≥ 230mm

Adjustment Of Flushing Device

When The New Car Leaves The Factory, The Position Of All Flushing Device Nozzles Has Been Precisely Adjusted To Achieve The Best Cleaning Effect. When The Nozzle Is Damaged Or Blocked, It Needs To Be Disassembled, Cleaned Or Replaced. After Reinstalling The Nozzle, It Needs To Be Carefully Adjusted.

Requirements For S-type Anti-aircraft Gun Device

The S-type 360 ° Rotating Anti-aircraft Gun Can Be Adjusted At Any Time, With A Maximum Range Of Over 35 Meters For Cylindrical Shapes And Over 15 Meters For Foggy Shapes According To Needs. It Can Be Adjusted To Direct, Heavy, Moderate, Light, Or Drizzle Shapes As Needed.

Requirements For Wanqian Flushing Device

Two Conical Nozzles Spray Water In Opposite Directions, With The Vehicle's Longitudinal Centerline As The Water Column Spraying Onto The Intersection Of The Ground. The Sprayed Water Curtains Should Overlap With Each Other, With An Overlap Of 10-40mm. The Sprayed Water Curtains Can Reach Up To Ten Lanes In Both Directions.

Requirements For Rear Spraying Device

Two Sprinkler Nozzles Spray Water Towards The Rear Of The Vehicle, And The Sprayed Water Curtains Should Overlap With Each Other, With An Overlap Of 10-40mm. The Sprayed Water Curtain Can Reach 15 Square Meters.

Winter Water Release

Before The Arrival Of Weather With A Temperature Of 0 ℃ Or Below, The Water Tank, Water Pipes, Water Pumps, And Valves Should Be Drained Of Water. Special Attention Should Be Paid To Placing The Ball Valve In A Semi Open Position, Where The Handle Of The Ball Valve Is At A 45 Degree Angle To The Centerline. It Is Not Suitable To Use This Vehicle In Low Temperature And Icy Weather.

If Car Enthusiasts Have Doubts About Winter Driving Of Sprinkler Trucks, They Can Consult The Corresponding After-sales Service Personnel.

The Above Are Some Suggestions Regarding The Running In And Maintenance Of Our Winning Sprinkler Truck For New Cars; Car Enthusiasts, Please Pay Attention To Checking.