[Maintenance] If The Windshield Cannot Be Wiped Clean, Replacing The Wiper May Not Be The Best Solut
The Windshield Always Cannot Be Wiped Clean, Even If A New Wiper Is Installed, It Is Still Of No Use. It's Not Necessarily That The Windshield Wipers Are Aging, But Rather That There Is An Oil Film On Your Car Window. The Oil Film Mainly Comes From The Oil Mist Emitted By The Vehicle, Which Gradually Adheres To The Windshield During Normal Driving. In This Case, It Is Difficult To Completely Remove It. Today, Kaili Zhuanqi Provides You With A Small Trick To Quickly Clean The Oil Film On The Windshield.
Then
If It Is The Problem With The Wiper Blade Itself That Causes The Windshield To Not Be Cleaned Thoroughly
What Should We Do Next?
Today, Kaili Zhuanqi Will Talk To You About How To Clean Wiper Blades
If Properly Maintained, The Original Wiper Rubber Strip Can Have A Lifespan Of Up To 5 Years. Daily Maintenance Requires Timely Removal Of Fine Sand Particles On The Wiper Rubber Strip. If These Fine Sand Particles Are Not Removed, It Is Equivalent To Using A Grinding Wheel To Polish The Wiper Rubber Strip, And The Smoothness Will Quickly Decrease. The Rough Rubber Strip Will Definitely Not Be Able To Wipe Away Rainwater. Therefore, When Washing The Car, It Is Necessary To Personally Use A Clean Towel To Remove The Tiny Sand Particles On The Wiper Rubber Strip. In Addition, When Parking In Summer, Try Not To Expose Yourself To Direct Sunlight, As Rubber Products Are Most Sensitive To UV Radiation And Are Prone To Aging And Hardening.
If The Wipers Are Found To Be Unable To Clean Thoroughly, The Vast Majority Of Cases Are Caused By Improper Maintenance And Rough Rubber Strips Of The Wipers. In Fact, The Rubber Strips Have Not Aged Or Hardened. Just Find A Way To Polish The Rough Rubber Strip Smooth. Here's How To Restore The Wipers To Their Original Condition:
How To Restore The Wipers To Their Original Condition
1. First, Remove The Two Windshield Wipers
2. Prepare A Water Sandpaper
You Can Buy 2000 Grit Sandpaper At The Paint Shop. Tear The Sandpaper Into Small Pieces, And Use One Small Piece Each Time.
3. Soak The Wiper And Sandpaper In Clean Water
4. Polish The Rubber Strip Of The Wiper With Sandpaper And Water
Note That Not Only Should The Two Sides Of The Rubber Strip Be Polished, But Also The Front Of The Rubber Strip Should Be Polished Appropriately. The Time Should Be Controlled At Around 5 Minutes.
Precautions For Daily Maintenance Of Wipers
1. When Washing The Wiper, First Lift The Wiper And Rinse It Clean In The Direction Of The Rubber Strip With Light Force.
2. Do Not Replace Glass Water With Tap Water.
3. When The Vehicle Is Parked For A Long Time Or Parked In Hot Or Cold Weather, Please Lift The Wiper Arm.
4. Be Sure To Use The Wiper With Water On The Glass Surface To Avoid Dry Scraping And Damaging The Rubber Strip.
